Molten Weld

For general-purpose aluminum TIG welding, the most common filler rods are ER4043 and ER5356. The best rod for your project depends on factors such as the aluminum alloy you are welding, required weld strength, and post-weld finishes like anodizing. ER4043 aluminum TIG welding rod ER4043 is an aluminum filler rod with 5% silicon, making it ideal for general-purpose aluminum welding, especially for 6XXX series alloys. Best for:

• Welding 6XXX series alloys: Including 6061 and 6063, ER4043 provides excellent fluidity and reduces crack sensitivity.
• Cast aluminum repairs: The high silicon content is excellent for welding cast aluminum alloys.
• High-temperature service: It performs better than ER5356 in applications with sustained temperatures over 150°F (66°C).
• Beginners: Its lower melting point and good fluidity make it easier to work with, resulting in smoother welds.
• Cost-effective projects: ER4043 is often less expensive than ER5356. 

Key properties:

• Color after anodizing: The weld will turn a dark gray to black color after anodizing, making it unsuitable for applications that require a cosmetic finish.
• Tensile strength: It has a lower tensile strength (around 11 KSI) compared to ER5356. 

Additional Information:

• Delivery Time: 24 HOURS
• Packaging Details: 5 KG / BOX

A Tig Torch 18V/4MT with a black handle is a 4-meter, water-cooled torch for Gas Tungsten Arc Welding (GTAW). The WP-18 series is a heavy-duty torch designed for high-amperage, continuous welding, often rated for 250 to 350+ Amps. Unlike air-cooled torches, a water-cooled torch requires a separate water cooler system to function.

• 18V: This refers to the WP-18 series water-cooled torch body, which features a manual gas valve on the handle for controlling the flow of argon.
• 4MT: This specifies a cable length of 4 meters (approx. 13 feet), providing a good reach for many heavy-duty welding tasks.
• Black Handle: The ergonomic handle is a standard color for this type of torch.
• Water-Cooled: The primary feature that differentiates the WP-18 from the air-cooled WP-26. The water circulates through internal channels to remove heat, allowing the torch to operate at higher amperages for longer periods without overheating.  
•     Key features and benefits
• Superior Heat Management: The water-cooling system allows for a higher duty cycle and prevents the torch body and consumables from overheating during extended, high-amperage welding.
• • Compact Head: Because the cooling is more efficient, the torch head can be smaller and more maneuverable than an air-cooled torch of a similar amperage rating.
  • Operator Comfort: The cooler running temperature of the torch reduces fatigue during long welding sessions.
  • Standard Consumables: The WP-18 series uses common consumables (collets, collet bodies, nozzles) that are compatible with the WP-17 and WP-26 torches.
  • Increased Productivity: The ability to weld at higher amperages for longer durations leads to increased efficiency, especially in industrial applications. 

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: 1 Piece packing

Water-cooled TIG torches are essential for high-amperage welding applications and extended use. They use a closed-loop system to circulate coolant through the torch head, effectively dissipating heat to prevent overheating, improve consumable lifespan, and enhance operator comfort.

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: Per Piece packing

A gas cutting torch, also known as an oxy-fuel cutting torch or blowpipe, is a handheld tool that uses a high-temperature flame to cut metal. It mixes oxygen with a fuel gas, such as acetylene or propane, to create a preheat flame. A separate, high-pressure stream of pure oxygen is then released to rapidly oxidize the metal and blow the molten material away, creating a clean cut. 

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: Per piece packing

A 26V/4MT single-cable TIG torch is a 4-meter, air-cooled torch for Gas Tungsten Arc Welding (GTAW), typically rated for 200 Amps DC. The "V" in the model number indicates it has a valve on the handle for manual gas flow control. The single cable design is more lightweight and flexible than a two-cable system. 

• 26V: This refers to the WP-26 series air-cooled torch body. It has a manual valve to control the argon gas flow directly from the torch handle. The WP-26 is a robust, heavy-duty torch that can handle higher amperage compared to smaller air-cooled torches.
• 4MT: This indicates the cable length is 4 meters (approx. 13 feet), providing a good reach for many welding tasks.
• Black Handle: The ergonomic, black-colored handle is a standard feature for this type of torch.
• Single Cable: The single cable design combines the power cable and the argon gas hose into one, offering a cleaner setup and improved flexibility compared to separate cables.

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: 1 Piece pack

A TIG Torch 26V/4MT with a male connector and a blue handle is a 4-meter, air-cooled torch for Gas Tungsten Arc Welding (GTAW) that is rated for up to 200 Amps DC. 

• 26V: This refers to the WP-26 series, a robust, air-cooled torch with a manual gas valve on the handle for controlling the flow of argon.
• 4MT: This indicates a cable length of 4 meters (approx. 13 feet), which offers a good range for most welding applications.
• Blue Handle: An ergonomic, contoured handle in a blue color.
• Male Connector: The torch cable terminates in a male connector, which plugs directly into a compatible female socket on the welding machine. The type of male connector can vary, so it's important to match it with your machine.

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: 1 piece packing

A TIG torch head 26V (without a knob) refers to an air-cooled, 200 Amp torch body from the WP-26 series that does not have a manual gas valve. This type of torch head is used with welding machines that control the shielding gas flow via an internal solenoid valve (e.g., a foot pedal or a machine panel control).
Key specifications

• Series: WP-26
• Cooling Method: Air-cooled (gas cooled)
• Amperage Rating: Typically 150-200 Amps DC at a 60% duty cycle
• Gas Control: No manual valve (knob). The gas passes through the power cable connection to the machine where it is controlled electrically.
• Material: Constructed from high-quality plastic and copper for durability and efficient performance
• Voltage: 26 V

Features and benefits

• Machine-controlled gas flow: Ideal for use with modern TIG welding machines that have built-in gas solenoids and remote control options (like foot pedals).
• Durable and reliable: The WP-26 series is known as a workhorse torch, valued for its robust design and higher amperage capacity compared to smaller torches like the WP-17 series.
• Standard consumables: Uses widely available and inexpensive WP-26 consumables (collets, collet bodies, nozzles, etc.).
• Ergonomic design: The body is designed for a comfortable grip during welding operations.

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: 1 Piece packing

An argon regulator with a flow meter is a combined device essential for safely and precisely controlling the delivery of shielding gas for TIG and MIG welding. It reduces the high pressure from the gas cylinder to a safe working pressure and provides an accurate measure of the gas flow rate.
Key Components

• Regulator: This mechanism reduces the extremely high pressure inside the gas cylinder (often up to 4000 PSI or more) to a manageable and safe output pressure.
• Pressure Gauge: One large dial shows the remaining pressure in the gas cylinder, so you know how much gas you have left.
• Flow Meter (Flow Tube): This is a vertical, clear tube with a floating ball (often called a "peashooter" style) that indicates the actual volume of gas flowing in Cubic Feet per Hour (CFH) or Liters Per Minute (LPM). This is more accurate for measuring flow volume than a pressure gauge alone.
• Adjustment Knob/Valve: A hand-turn knob allows for precise adjustment of the gas flow rate to meet the specific requirements of the welding job.

Additional Information:

• Delivery Time: 24 Hours
• Packaging Details: 5 Piece per Pack

SAW nozzles are typically made from highly conductive and heat-resistant materials like copper, brass, or a copper chromium zirconium alloy to ensure durability and optimal electrical contact. They are available in various internal diameters to match specific wire sizes, such as 2mm, 2.5mm, 3.15mm, and 4mm. Key features include:

• Material: Most commonly copper or brass.
• Function: Ensures proper electrical transfer to the welding wire and helps maintain a stable arc.
• Types: Available in single-hole and twin-hole configurations for single or twin-wire applications.
• Durability: Premium materials like copper chromium zirconium offer extended life, reducing downtime. 

Additional Information:

• Delivery Time: 24 HOURS
• Packaging Details: BOX