Molten Weld

AWS Class ER4043 refers to an aluminum alloy filler metal, often referred to as ALSi5, containing approximately 5% silicon. It's a widely used, general-purpose aluminum alloy with improved fluidity and a brighter weld finish, making it popular for welding various aluminum grades, especially heat-treatable alloys like 6061 and 6063, and some casting alloys.

• Aluminum (Al): The base metal, making up the balance of the alloy.
• Silicon (Si): 4.5-6.0%. This silicon additive improves the fluidity of the weld pool, resulting in a less crack-sensitive weld and a bright finish.
• Iron (Fe): Maximum 0.80%.
• Copper (Cu): Maximum 0.30%.
• Magnesium (Mg): Maximum 0.05%.
• Zinc (Zn): Maximum 0.10%.
• Titanium (Ti): Maximum 0.20%.
• Manganese (Mn): Maximum 0.05%.
• Beryllium (Be): Maximum 0.0003%.
• Other Elements: Maximum of 0.05% each, with a total maximum of 0.15%.

Additional Information:

• Item Code: Alloy4043
• Production Capacity: 1000 kg
• Delivery Time: 24 Hours
• Packaging Details: 5 kg packing

ER70S-6 is a mild steel MIG welding wire that conforms to AWS 5.18 standards, indicating a tensile strength of 70,000 psi and a high level of deoxidizers for welding materials with moderate contamination like rust or mill scale. This versatile wire is used in applications including construction, farm equipment, tanks, truck bodies, and general fabrication, providing smooth welds and good arc stability.

• Carbon (C): 0.06 – 0.15%
• Manganese (Mn): 1.40 – 1.85%
• Silicon (Si): 0.80 – 1.15%
• Phosphorus (P): 0.025% maximum
• Sulfur (S): 0.025% maximum
• Copper (Cu): Typically less than 0.50%, though the AWS A5.18 specification does not always include a maximum limit for copper, it is sometimes listed as a typical value (e.g., <0.35%).

Additional Information:

• Delivery Time: 24 Hours

AWS class ER4047 aluminum welding wire is a 12% silicon filler metal used for both MIG (Gas Metal Arc Welding) and TIG (Gas Tungsten Arc Welding) processes. It is prized for its excellent fluidity and low melting point, which minimizes weld distortion and hot cracking.

AWS Class ER 4047 is an aluminum alloy filler metal specified by the American Welding Society (AWS) A5.10 standard. It is a eutectic aluminum-silicon alloy containing approximately 12% silicon, which is primarily used for welding and brazing aluminum alloys. 

• Aluminum (Al): Balance
• Silicon (Si): 11.0 - 13.0 %
• Iron (Fe): 0.80 % maximum
• Copper (Cu): 0.30 % maximum
• Zinc (Zn): 0.20 % maximum
• Manganese (Mn): 0.15 % maximum
• Magnesium (Mg): 0.1 % maximum

Additional Information:

• Delivery Time: 24 HOURS

ER304/304L refers to stainless steel welding filler wire or rod used for joining 18-8 austenitic stainless steels, with 304L being the low-carbon version of 304. The "ER" prefix indicates it's a filler metal, and the "L" denotes the lower carbon content (max 0.03%) in 304L, which provides better resistance to inter-granular corrosion, especially after welding, compared to the higher carbon 304 grade. These wires are versatile, used in various industries from food processing to shipbuilding, and are available in different forms and diameters for TIG, MIG, and other welding processes.

• Carbon (C): 0.03% max
• Chromium (Cr): 18.00% – 20.00%
• Nickel (Ni): 8.00% – 10.50%
• Manganese (Mn): 2.0% max
• Silicon (Si): 1.0% max
• Phosphorus (P): 0.045% max
• Sulfur (S): 0.03% max

Additional Information:

• Delivery Time: 24 Hours

AWS Class ERTi-5 is a titanium alloy filler metal used for both MIG (Gas Metal Arc Welding) and TIG (Gas Tungsten Arc Welding) processes. The "Ti-5" refers to its composition: a 6% aluminum and 4% vanadium alloy, also known as Titanium Grade 5

• High strength: ERTi-5 offers high tensile strength and toughness, with a tensile strength of 130,000 psi. Its strength can be further increased through heat treatment.
• Composition: The addition of aluminum and vanadium enhances the material's strength and mechanical properties. The typical chemistry per AWS A5.16 includes:
  • Aluminum (Al): 5.5–6.75%
  • Vanadium (V): 3.5–4.5%
  • Iron (Fe): 0.22%
  • Carbon (C): 0.05%
  • Oxygen (O): 0.12–0.20%
  • Nitrogen (N): 0.03%
  • Hydrogen (H): 0.015%
• Corrosion resistance: It provides exceptional corrosion resistance, similar to that of Grade 2 titanium, making it suitable for demanding environments.
• Weldability: The wire has good weldability and is commonly used for welding Titanium Grade 5 alloys.
• Heat treatable: The weld deposits are heat-treatable, allowing for post-weld processing to enhance mechanical properties.

Additional Information:

• Item Code: ERTI-5
• Production Capacity: 1000 kg
• Delivery Time: 24 HOURS
• Packaging Details: 10kg packing

Alloy 308 SAW & Flux is a welding wire considered to run on straight current, inverted division, and irregular current. Alloy 308L wire is designed for welding the same chemical composition in the cast and wrought forms. Prior heat process and interpass temperatures of not less than 300°F (150°C) are optional during welding. Post-weld heat management should be between 1100°F (629°C) and not to surpass 1150°F (620°C), as high temperatures may affect in hardening these wires as these are used for welding ASTM CA6NM castings or similar materials, as well as light-gauge 410, 410S and 405 base metals.

• Carbon (C): ≤ 0.03% for ER308L, 0.08% max for ER308
• Chromium (Cr): 19.5% - 22.0%
• Nickel (Ni): 9.0% - 11.0%
• Manganese (Mn): 1.0% - 2.5%
• Silicon (Si): 0.30% - 0.65%
• Phosphorus (P): 0.03% max
• Sulfur (S): 0.03% max
• Iron (Fe): Balance
• Other elements: Some grades may include small amounts of Copper (Cu) and Molybdenum (Mo)

Additional Information:

• Delivery Time: 24 Hours

Alloy 309LMo is a specific type of Molybdenum-containing stainless steel welding consumable designed for welding dissimilar materials, such as stainless steel to carbon or low alloy steels, and for overlay applications. It deposits an austenitic weld metal with a composition similar to a 23-13-2.5 Cr-Ni-Mo analysis, offering excellent corrosion, oxidation, and scaling resistance at elevated temperatures, as well as improved pitting resistance in halide environments. The "L" in 309LMo denotes its low carbon content, which helps prevent intergranular corrosion.

• Chromium (Cr): 23.0% - 25.0%
• Nickel (Ni): 12.0% - 14.0%
• Molybdenum (Mo): 2.0% - 3.0%
• Carbon (C): 0.03% max
• Manganese (Mn): 1.0% - 2.5%
• Silicon (Si): 1.0% max
• Sulfur (S): 0.02% - 0.03% max
• Phosphorus (P): 0.03% max

Additional Information:

• Delivery Time: 24 Hours

AWS ER2209 is a duplex stainless steel filler metal designed for welding 22% chromium duplex stainless steels and some super duplex stainless steels, offering high tensile strength and excellent resistance to stress corrosion cracking, pitting, and chloride environments. It creates a nearly balanced austenite-ferrite microstructure in the weld deposit, providing improved corrosion resistance compared to austenitic grades. The filler metal is available as wire (ER designation) for processes like MIG and TIG, and as coated electrodes (E designation). 

Diameters: 
2.5mm, 3.2mm, 4.0mm, 5.0mm.
 
Typical Mechanical Properties:          
Typical Chemical Compositon:  
Welding Current:(AC/DC±)

Additional Information:

• Delivery Time: 24 HOURS

AWS Class ER310 is a solid stainless steel welding wire for GMAW (MIG) and GTAW (TIG) processes, according to AWS A5.9. It is a fully austenitic wire used for welding heat-resistant, 25%Cr/20%Ni stainless steels, including cast forms and applications requiring high service temperatures up to 1100°C. The wire provides excellent heat resistance and is also used for cladding and joining carbon steel to 18/8 stainless steels. 

• Carbon (C): 0.08 – 0.15%
• Chromium (Cr): 25.0 – 28.0%
• Nickel (Ni): 20.0 – 22.5%
• Manganese (Mn): 1.0 – 2.5%
• Silicon (Si): 0.30 – 0.65%
• Molybdenum (Mo): 0.75% max
• Phosphorus (P): 0.03% max
• Copper (Cu): 0.75% max

Additional Information:

• Delivery Time: 24 Hours

AWS Class ER312 refers to a high-ferrite, high-chromium stainless steel welding filler metal designed for welding high-carbon and high-nickel dissimilar metals, as well as dissimilar alloys. Known for its high strength and high-temperature oxidation and corrosion resistance, ER312 creates a two-phase weld deposit with good crack resistance and is available in various diameters for MIG and TIG welding.

• Carbon (C): 0.15 max %
• Chromium (Cr): 28.0 – 32.0 %
• Nickel (Ni): 8.0 – 10.5 %
• Manganese (Mn): 1.0 – 2.5 %
• Silicon (Si): 0.30 – 0.65 %
• Molybdenum (Mo): 0.75 max %
• Phosphorus (P): 0.03 max %
• Copper (Cu): 0.75 max %

Additional Information:

• Delivery Time: 24 Hours

Chromium Molybdenum MIG & TIG Filler Metal Supplier in Mumbai, AWS/ASME 5.28 ER80S-B2 MIG & TIG Filler Metal, India, AWS Class ER80S-B2 MIG/TIG Filler Welding Wire, Alloy 80S-B2 Welding MIG & TIG Filler Metal, SFA A5.28 ER80S-B2 MIG & TIG Filler Metal, AWS ER80S-B2 MIG & TIG Filler Metal Rod & Wire, UNS K20900 MIG and TIG Stick Filler Metal, Chrome Moly Industrial ER80S-B2 MIG / TIG Filler Metal.

Additional Information:

• Delivery Time: 24 HOURS

AWS Class ER2594 is a type of super duplex stainless steel welding consumable, available as a welding wire for Gas Metal Arc Welding (GMAW/MIG) and Gas Tungsten Arc Welding (GTAW/TIG). It is known for its high corrosion resistance and strength, which are essential for demanding applications.

• Composition: ER2594 has a nominal composition (by weight) of 25.5% Chromium, 9.2% Nickel, 3.5% Molybdenum, and 0.25% Nitrogen.
• Microstructure: The weld deposit has an austenitic-ferritic duplex microstructure, providing a combination of toughness, strength, and corrosion resistance.
• Pitting resistance: It is characterized by a Pitting Resistance Equivalent Number (PREN) of at least 40, which indicates a high resistance to pitting corrosion in chloride-containing environments.
• Overalloyed: The wire is over-alloyed with 2-3% nickel to ensure an optimum ferrite/austenite ratio in the finished weld, maximizing its mechanical properties and resistance to stress corrosion cracking. 

Additional Information:

• Delivery Time: 24 HOURS

AWS Class ERCuSi-A is a silicon bronze welding alloy used for both MIG and TIG welding of various copper alloys and steel. The filler metal creates welds with high strength, good ductility, and excellent corrosion resistance.

• Silicon: 2.8%–4.0%
• Manganese: up to 1.5%
• Tin: up to 1.0%
• Zinc: up to 1.0%
• Copper: Balance
• Mechanical properties: The weld deposits are characterized by a minimum tensile strength of 50,000 psi and a minimum elongation of 65%. 

Additional Information:

• Delivery Time: 24 Hours

AWS Class ERCuAl-A2 refers to a specific aluminum bronze filler metal conforming to AWS A5.7 specification, used for both MIG (GMAW) and TIG (GTAW) welding processes. It is a versatile copper-based alloy with approximately 1% iron content, known for its high strength, excellent tensile strength, and corrosion resistance. This wire is ideal for joining similar aluminum bronze materials, as well as various dissimilar metals, including manganese bronze, steel, and some copper-nickel alloys. 

• Aluminum (Al): 8.5-11.0%
• Iron (Fe): 0.5-1.5%
• Copper (Cu) + Silver (Ag): Balance (remainder of the alloy)
• Zinc (Zn): 0.02 max
• Lead (Pb): 0.02 max
• Other Elements: 0.50 max

Additional Information:

• Delivery Time: 24 Hours

AWS: ER70S-2 TIG Triple deoxidized wire containing zirconium, titanium, and aluminum in addition to silicon and manganese. Produces x-ray quality welds over most surface conditions. Recommended for TIG welding on all grades of mild steel.

• Carbon (C): A small percentage (0.07% max).
• Manganese (Mn): A deoxidizer, typically 0.90-1.40%.
• Silicon (Si): Another deoxidizer, usually 0.40-0.70%.
• Zirconium (Zr): A key deoxidizer, 0.02-0.12%.
• Titanium (Ti): Acts as a deoxidizer, 0.05-0.15%.
• Aluminum (Al): Also serves as a deoxidizer, 0.05-0.15%.

Additional Information:

• Delivery Time: 24 HOURS

AWS ER80S-B9 is a high-strength, low-alloy welding filler metal designed for applications requiring creep resistance and service at elevated temperatures. It is important to note that the common designation is ER90S-B9, and while the "80" indicates a tensile strength of 80 ksi, the addition of chromium and molybdenum for high-temperature service pushes the classification to 90 ksi. 

• Carbon (C): Around 0.04% to 0.08%.
• Chromium (Cr): 8.0% to 9.5%.
• Molybdenum (Mo): 1.0% to 1.5%.
• Iron (Fe): The base material, making up the majority of the alloy.
• Manganese (Mn): Present in smaller quantities.
• Silicon (Si): Also found in smaller quantities.

Additional Information:

• Delivery Time: 24 HOURS

AWS ER 80S-B8 is a low-alloy, copper-coated welding wire containing approximately 9% chromium and 1% molybdenum, used for welding 9Cr-1Mo steels and similar alloys in applications requiring high-temperature creep resistance and corrosion resistance, such as power plants, petrochemical refineries, and heat exchangers. This air-hardening alloy requires preheating and post-weld heat treatment (PWHT) to maintain its mechanical properties at elevated service temperatures, typically up to 600°C or 1100°F.

Additional Information:

• Delivery Time: 24 HOURS

ER430 is a ferritic stainless steel filler metal designed for welding similar 430-grade alloys, providing good corrosion resistance and ductility, while the "L" in other classifications signifies a low-carbon content for enhanced corrosion resistance. 

MIG vs. TIG Welding with ER430

• MIG (Gas Metal Arc Welding): ER430 is used as a continuously fed, consumable electrode that generates sparks and heat to form the weld. 
• TIG (Gas Tungsten Arc Welding): ER430 can be used as a filler rod, manually fed into the weld pool alongside a non-consumable tungsten electrode, which generates the heat. 

Additional Information:

• Delivery Time: 24 HOURS

AWS Class ER70S-G is a welding wire designed for both MIG (GMAW) and TIG (GTAW) welding of low-alloy and carbon steels. The "G" designation indicates that its exact chemical composition is unspecified and may vary by manufacturer, but it is typically optimized for specific applications

For MIG (GMAW) welding, ER70S-G can be used with a variety of shielding gases, including: 

• 100% Carbon Dioxide (CO2)
• Argon and CO2 mixed gas

ER70S-G welding wire is widely used for welding structural steels and is suitable for both semi-automatic and automatic gas-shielded welding. It is commonly used in these industries: 

• Pressure vessels and storage tanks
• Shipbuilding and marine applications
• Heavy equipment and machinery manufacturing
• Construction of pipelines, bridges, and structural steel components 

Additional Information:

• Delivery Time: 24 HOURS

SS304L is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. Wire contains low carbon 19Cr - 10Ni. The weld metal exhibits excellent resistance to Intergranular Corrosion. It is ideally suited for welding of stainless steels of similar composition like 304L and equivalents, for overlays, surfacing, and repairing castings of similar materials.

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

 

Additional Information:

• Delivery Time: 24 Hours

The ER2209 TIG wire is a duplex stainless steel filler metal specified under AWS A5.9/ASME SFA 5.9, designed for welding duplex stainless steel alloys like UNS S31803 and S32205. The specified dimensions are 3.20mm in diameter and 100mm (or more commonly 1000mm/36 or 39 inches cut lengths). Key Characteristics and Specifications

• Classification: AWS A5.9 / ASME SFA 5.9, Class ER2209.
• Material: Duplex stainless steel, offering a balanced austenitic-ferritic microstructure in the as-welded condition.
• Dimensions: 3.20 mm diameter (approx. 1/8") and typically available in straight cut lengths of around 1000 mm (36 or 39 inches) for TIG welding.
• Welding Process: Primarily used for Gas Tungsten Arc Welding (GTAW or TIG), typically using 100% Argon as a shielding gas and DCEN (DC minus electrode negative) polarity.
• Key Properties:
  • High Strength: Exhibits high tensile strength and yield strength.
  • Superior Corrosion Resistance: Excellent resistance to pitting, crevice corrosion, general corrosion, and especially stress corrosion cracking in chloride and hydrogen sulfide-containing environments.
  • Good Weldability: Offers low distortion and excellent weldability. 

ApplicationsThe ER2209 TIG wire is widely used in industries requiring high durability and corrosion resistance in critical environments. Applications include: 

• Offshore oil and gas pipelines and platforms.
• Chemical processing plants and equipment.
• Heat exchangers and pressure vessels.
• Desalination plants.
• Pulp and paper industries.
• Cladding of carbon and low-alloy steels to create corrosion-resistant layers. 

Additional Information:

• Delivery Time: 24 HOURS

A 304L 2.40MM x 1000MM TIG wire is a low-carbon, austenitic stainless steel filler metal rod used in TIG welding for applications requiring excellent corrosion resistance. The American Welding Society (AWS) designation for this filler wire is ER308L. The specific dimensions are a 2.40 mm diameter and a 1000 mm length. Key features

• Grade: The "304L" in the name specifies a low-carbon (L) austenitic stainless steel. This low carbon content minimizes the risk of intergranular corrosion, which can occur when welding standard high-carbon grades like 304.
• Material: The wire is made of stainless steel with a composition similar to AISI 304L.
• Welding process: This is a filler wire for Gas Tungsten Arc Welding (GTAW), more commonly known as TIG welding.
• Welding compatibility: It is compatible with both DC and AC TIG welding processes.
• Applications: The ER308L filler wire is suitable for welding austenitic stainless steels such as AISI 301, 302, 304, and 304L. Common applications include the fabrication of food and dairy equipment, pharmaceutical and chemical processing plants, and pressure vessels.
• Standards: It is typically manufactured to meet standards such as AWS A5.9.

Additional Information:

• Delivery Time: 24 HOURS

Key features

• Extra-low carbon content: The "L" in 304L stands for "low carbon," which minimizes carbide precipitation during welding. This helps prevent intergranular corrosion, which can weaken the weld.
• Corrosion resistance: 304L wire provides excellent corrosion resistance, similar to 304 stainless steel, in a range of environments including food processing, chemical, and general industrial applications.
• Controlled ferrite content: Some products, like the StarBlaze MIG 304L, feature a controlled ferrite content (3-8%) to ensure crack-free welds and provide balanced toughness.
• Good mechanical properties: This wire offers good tensile strength, yield strength, and elongation, resulting in durable, high-quality weld deposits.
• Smooth feeding: Precision-wound spools help ensure consistent wire feedability, contributing to stable arc performance and flawless welds. 

Additional Information:

• Delivery Time: 24 HOURS

TIG welding filler rods are consumable materials manually fed into a weld pool to create a strong and clean joint. The proper rod selection is crucial for matching the strength, corrosion resistance, and other properties of the base metal. Types of TIG welding rods by materialCarbon and Mild Steel

• ER70S-2: Contains additional deoxidizers, making it good for welding over light rust or contaminants. A good example is the Weldcote Metals ER70S-2 36" TIG Welding Rod.
• ER70S-6: Features higher levels of silicon and manganese, which results in a smoother bead appearance and strong mechanical properties. The UNIFAMILY TIG Welding Rod ER70S-6 is a readily available option. 

Stainless Steel

• ER308L: Best for welding 304 and 304L stainless steels, commonly used for kitchen equipment and piping. You can find products like the ESAB TIG 308L Stainless Steel Tig Rod.
• ER316L: Contains molybdenum, offering superior corrosion resistance for marine and chemical environments. A good product is the WeldingCity 1-Lb ER316L Stainless Steel 316 TIG Welding Rod.
• ER309L: Used specifically for welding dissimilar metals, such as joining stainless steel to carbon steel. 

Aluminum

• ER4043: A versatile, general-purpose rod with 5% silicon for improved fluidity and crack resistance. A common product is the Hot Max 24189 ER4043 Aluminum TIG Filler Rod.
• ER5356: Offers higher tensile strength than ER4043 and better corrosion resistance in marine applications, making it ideal for structural parts and alloys from the 5xxx series. An example is the WeldingCity ER5356 TIG Welding Rod. 

Other Alloys

• Nickel Alloys: Rods like ERNiCrMo-3 are used for high-performance metals such as Inconel, common in aerospace and power generation.
• Copper and Bronze: Rods such as ERCuSi-A (Silicon Bronze) are ideal for TIG brazing and working with copper alloys.
• Titanium: Rods like ERTi-2 (Grade 2) are used for welding commercially pure titanium, while ERTi-5 (Grade 5) is for stronger alloys (Ti-6Al-4V) used in aerospace. The WeldingCity 10-pcs Titanium TIG Welding Rods ERTi-2 is one such product. 

Additional Information:

• Production Capacity: 1000 KG
• Delivery Time: 24 HOURS
• Packaging Details: 5 KG / BOX

It excels in welding Inconel alloy C-276 and other nickel-based alloys to themselves, other nickel alloys, and steel. Its high molybdenum content provides excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion.

• Welding Materials:Suitable for welding Nickel base alloys like Inconel C-276, Incoloy 800, and other similar nickel alloys to themselves. 

Dissimilar Welding:

• Used to weld nickel alloys to various types of steel and other nickel alloys. 

• Key Properties:

• Corrosion Resistance: Offers outstanding resistance to stress corrosion cracking, pitting, and crevice corrosion due to its high molybdenum content. 
• Temperature Resistance: It provides excellent resistance to oxidizing atmospheres up to 1900°F. 

• Carbon (C): 0.02% max
• Chromium (Cr): 14.5% – 16.5%
• Iron (Fe): 4.0% – 7.0%
• Manganese (Mn): 1.0% max
• Molybdenum (Mo): 15.0% – 17.0%
• Nickel (Ni): Remainder (Balance)
• Silicon (Si): 0.08% max
• Tungsten (W): 3.0% – 4.5%

Additional Information:

• Delivery Time: 24 Hours

AWS Class ERNiCr-3 (also known as Alloy 82) is a nickel-chromium-molybdenum filler wire used for MIG (GMAW) and TIG (GTAW) welding of base metals like Inconel 600, Incoloy 800, and for dissimilar metal applications. It is particularly suited for applications requiring good weldability and corrosion resistance.

Detailed Composition Requirements (per AWS A5.14): 

• Nickel (Ni): 67.0% minimum
• Chromium (Cr): 18.0 - 22.0%
• Manganese (Mn): 2.5 – 3.5%
• Iron (Fe): 3.0% maximum
• Titanium (Ti): 0.75% maximum
• Niobium + Tantalum (Cb+Ta): 2.0 – 3.0%
• Carbon (C): 0.10% maximum
• Silicon (Si): 0.50% maximum
• Phosphorus (P): 0.03% maximum
• Sulfur (S): 0.015% maximum
• Cobalt (Co): 0.12% maximum
• Others: 0.50% maximum

Additional Information:

• Delivery Time: 24 HOURS

ERNiCrMo-3 is an AWS-classified nickel-chromium-molybdenum (NiCrMo) filler metal, also known as Inconel 625, used for welding various nickel alloys, stainless steels, and dissimilar metal combinations like steel with nickel-based alloys. It is known for providing moderate strength, excellent corrosion resistance, and good oxidation resistance, suitable for applications in power generation, petrochemicals, and offshore environments, especially in the cryogenic to 1000°F (538°C) temperature range.

• Nickel (Ni): 58.0 - 63.0%
• Chromium (Cr): 20.0 - 23.0%
• Molybdenum (Mo): 8.0 - 10.0%
• Niobium (Nb) + Tantalum (Ta): 3.15 - 4.15%
• Iron (Fe): Up to 5.0%
• Manganese (Mn): Up to 1.0%
• Silicon (Si): Up to 0.5%
• Carbon (C): Up to 0.05%
• Titanium (Ti): Up to 0.40%
• Aluminum (Al): Up to 0.40%

Additional Information:

• Delivery Time: 24 Hours

The product is 304L 1.60MM X 1000MM TIG WIRE, a low-carbon stainless steel welding filler wire for TIG welding 304 and 304L grade stainless steel. It is a 1.60mm diameter, 1000mm long TIG wire with superior corrosion resistance and durability. Product details

• Type: TIG welding wire
• Material: 304L austenitic stainless steel
• Diameter: 1.60 mm
• Length: 1000 mm
• Features: Engineered for superior welding quality, corrosion resistance, and durability. Its low-carbon composition minimizes carbide precipitation and enhances weld integrity.
• Applications: Ideal for welding 304 and 304L grade stainless steel components.
• Origin: Made in India. 

Additional Information:

• Delivery Time: 24 HOURS